FCS One Fermentation Kits

FCS One is designed for those of you that want a simpler setup and don't need more than 2 CAN ports and 2 relays.

Below you will find a kit based setup of FCS One to make it easier for you.

The total price is the same as buying the parts separately.

If you prefer a modular configuration, have a look at the FCS Configurator for Fermentation.
 

FCS One Fermentation Starter Kit for Brite/Unitank

We've made a kit for those of you that don't want to make too many choices. This kit includes the recommended parts to get started with FCS.

- FCS One DC with power supply
- 1 temperature sensor (TC 1.5" 160mm)
- 1 pressure sensor with gas out solenoid
- All cables and adapters needed (3m length)
- Ball mount system and airlock

The kit does not include a valve/pump for cooling as these are tank dependent, and many of you already have a solenoid.

For non-Brewtools tanks, you also may need an adapter and/or tee to connect the spunding valve/pressure sensor assembly.

See guide below.

Accessories

To complete your FCS One kit setup, some accessories are needed. 

- A solenoid kit or submersible pump.

- For MiniUni+, you need to replace the Mini Spunding valve with an M24 to Tri Clamp adapter and a 90 degree TC34mm elbow to fit your spunding assembly (if you want to use our TC air lock. No need for elbow if you use tubing as airlock). Rembember clamps/gaskets.

- If you don't have a Brewtools Unitank, we recommend getting TC 1.5" to 34mm adapter for the spunding setup. Tees/crosses are also available in all sizes to give you more ports.

- You can consider a kit for gas input if you want to use this feature.

For more choices, see the FCS Configurator for Fermentation

More pipes, fittings and adapters can be found in the Valves and Fittings section.