Configurator - Fermentation Control

Below you will find configurators for your desired setup. If you want to start with a kit, have a look at the FCS Fermentation Kits.

Have a look at the system schematic to see a full suggested setup.

FCS Configurator - Full flexibility

FCS features 4 CAN bus ports and 4 relay outputs (24V DC). Use this configurator if you want the possibility of getting all bells and whistles for the system. 

The system features a wall mounted I/O module with a sleek display mounted anywhere on the tank.

Example setup is with density, pressure, radar level and agitator on the CAN bus ports and cooling, gas out and gas in on the relay ports. An external relay for heating is optional and there will be features like automatic dry hopping in the future.

Click the product to start your configuration.

FCS One DC - Easy setup if you need less features

FCS One DC features 2 CAN bus ports and 2 relay outputs. You can also use the CAN ports as relay outputs with an adapter.

Use this setup if you don't need all bells and whistles and prefer an all-in-one solution.

Example setup is with density and pressure on the CAN bus ports and cooling and gas out on the relay ports. If you don't need density, you can replace it with gas input.

Click the product to start your configuration.

FCS One AC - Fermentation chamber or HLT

FCS One AC features 2 CAN bus ports and 2 AC outputs. You can also use the CAN ports as relay outputs with an adapter.

This is designed for custom setups where AC power is needed on the outputs (110-240V).

Example setup is a fermentation chamber (fridge etc.) with a small oven inside. Connect one AC output to the fridge compressor and the second to the heater. Can also be used for smaller HLT setups.

Click the product to start your configuration.