Our Unitanks are fermenters made for ambitious homebrewers and small breweries. As part of the Brewtools identity, we've explored new techniques and solutions. This has resulted in a series of high end fermentation tanks with new features and a lot of possibilities.
Key Features:
-A surface treatment which consists of steel blasting and electropolishing inside and outside. Offers a superior corrosion resistance and simple cleaning.
- Cooling jacket in the vertical walls offers efficient cooling without the hazzle of cleaning a spiral.
- Many options for connecting accessories like sensors, heaters, carb. stones and other accessories.
- Pressure rated for 2 bar / 30 PSI
- 8" TC port on top for easy access.
- 2" TC dump and racking valves.
Our Unitanks are designed and manufactured with special attention to safety and quality.
They are tested and certified according to the requirements for PED 2014/68/EU by a third party.
Specifications:
|
Low height w/o acc.:
|
122 cm
|
|
Max height w/o acc.:
|
147 cm
|
|
Packaging size:
|
132 (h) x 62 (b) x 62 (d) cm
|
|
Net weight:
|
50 kg
|
|
Gross weight:
|
54 kg
|
|
Tank diameter (inside):
|
Ø50 cm
|
|
Gross volume:
|
150 liter
|
|
Max rec. volume
|
140 liter
|
|
Min rec. volume:
|
45 liter
|
|
Volume, cone:
|
24 liter
|
|
Material:
|
1.5mm stainless steel (SS304)
|
|
Operating pressure:
|
1.0 bar / 15 PSI
|
|
Max pressure:
|
2.0 bar / 30 PSI
|
In the box:
- Unitank with adjustable frame
- 1 pcs Analog pressure gauge, TC34mm
- 2 pcs Butterfly-valve, 2"
- 1 pcs Butterfly-valve, 34mm DN20
- 1 pcs Blow-off pipe
- 1 pcs Racking arm 2"
- 1 pcs TC elbow 90°, 2"
- 1 pcs Insulation jacket, black neoprene
- 1 pcs Sample valve, 34mm
- 1 pcs TC Adapter 8"-4"
- 1 pcs TC blind cap, 4"
- 1 pcs TC blind cap 2"
- 2 pcs TC blind cap 1.5"
- 3 pcs TC blind cap 34mm
- 2 pcs TC gasket 8" lipped
- 2 pcs TC gasket 4"
- 2 pcs TC gasket 2" 5-pack
- 1 pcs TC gasket 1.5" 5-pack
- 3 pcs TC gasket 34mm 5-pack
- 1 pcs Tri Clamp 8"
- 1 pcs Tri Clamp 4"
- 5 pcs Tri Clamp 2"
- 2 pcs Tri Clamp 1.5"
- 10 pcs Tri Clamp 34mm
- 1 pcs TC tool
- 4 pcs M10 steel/rubber feet
- 1 pcs TC34mm safety valve (PRV, 2 bar)
- Necessary bolts and parts for assembly
Recommended accessories include: HopDrop-kit, Thermowells for your sensors, 34mm Ball-Lock gas adapter for CO2 filling, Carb. stone kit with Ball-Lock, Coil for sample valve, Spunding valve, Hose barbs for filling and dumping, 2" sight glass etc.
Note: The electro polishing process may leave some areas outside the tank where the current cannot reach. This may cause a light difference in color without affecting the products performance. Model in photo is a prototype. Minor changes and improvements may occcur.